Length in feet x Width in feet x Depth in feet (inches divided by 12). The calculator will then display the total cost of the sand you need. TONNAGE CALCULATOR HOW MUCH AGGREGATE (STONE, SAND, OR GRAVEL) DO I NEED? Round up to the nearest foot in the length and width boxes, and the same thing just use inches in the depth box to instantly get a result that will work well with most common aggregates. Calculate Fill Sand Type in inches and feet of your project and calculate the estimated amount of Sand / Screenings in cubic yards, cubic feet and Tons, that your need for your project. Calculate Tons of Compacted Gravel or Limestone. A cubic meter of typical sand weighs 1,600 kilograms 1.6 tonnes. Calculate Tons for Circles of Sand, Gravel or Limestone. How much is a ton of sand?
Our sand calculator can help you with that - all you have to do is enter the price of sand (per unit of mass, such as tonne, or per unit of volume, such as cubic yard). The Density of Fill Sand: 2,410 lb/yd³ or 1.21 t/yd³ or 0.8 yd³/t Please use this calculator to select which product you would like to calculate the total tonnage estimated for your project. You will need to have the dimensions of the area in feet and the depth of sand you wish to achieve in inches. You will need the length, width and depth of your project space to be able to get your estimated tonnage calculation. A ton of sand is typically about 0.750 cubic yards (3/4 cu yd), or 20 cubic feet. per yard. Most gravel weighs 1.4 to 1.7 tons per cubic yard . The numbers are obtained using this sand calculator. Phone: 847-223-7000 / Fax: 847-223-7067. Calculate Tons for Sand, Gravel or Limestone. Step Two: Calculate Weight in Tons Armed with the volume of material needed in cubic yards, the weight of material in tons can be found by multiplying the volume by the material density. This calculator solves for the cubic yards but returns the number of tons based on 2,800 lbs.
A square meter sandbox with a depth of 35 cm weighs about 560 kg or 0.56 tonnes. Sand Calculator Use the calculator below to determine how many tons of sand are needed for a particular area. Take the total and divide by 21.6 (the amount of cubic feet in a ton). Material Calculator For use in calculating quantities of Sand, Stone, Fill and Topsoil: Enter Data: V Enter Width of the Area in feet >>> Enter Length of the Area in feet >>> Results: Cubic Yards: Tons A thickness of: 2" A thickness of: 3" A thickness of: 4" A thickness of: 5" A thickness of: 6" Rectangular Area .